BMX fork KHE STYLUS 20 inch for U-brakes
£79.95*
Available, delivery time: 2-5 business days **
The KHE STYLUS 20 inch BMX fork combines lightweight 6061 aluminium fork legs, a strong CrMo steerer and a 0.59 inch offset for agile handling, low weight and precise control in flatland, street and training.
Accessories
KHE STYLUS 20 Inch BMX Fork for Flatland
The KHE STYLUS 20 inch BMX fork is an ultra-light Flatland BMX fork designed for precise control and U-brake setups. Its fork legs use high-grade 6061 aluminum, paired with a durable 1 1/8\" CrMo steerer tube for reliable strength under technical riding.
With only 15 mm offset, it delivers direct, agile steering ideal for flatland tricks and quick front-end response. The 10 mm dropouts feature a 7 mm wall thickness for secure wheel retention. Removable U-brake pivots let you run brakeless cleanly. At just 828 g, it balances low weight, stability, and sharp handling.
Produkthighlights
- 828 g lightweight flatland-ready fork
- 15 mm offset for agile steering
- 6061 aluminum legs, stiff and light
- 1 1/8\" CrMo steerer, durable
- 10 mm dropouts, 7 mm wall
- Removable U-brake pivots for brakeless
| Material: | HiTen steel |
|---|---|
| Tire size: | 20 inch |
| Size: | For 20" |
| Colour: | Anthracite |
| Weight: | 1.83 lbs / 828g |
| Dropouts: | 5mm wide, only for 10mm axles |
| Width: | 1,8 Zoll |
| Shaft diameter: | 1 1/8" |
| Shaft length: | 5.91 " / 150mm |
| Leads: | approx. 1.26" / 32mm |
Intended use: BMX fork for compatible 20-inch BMX bicycles, especially for flatland, street and training. Designed for 1 1/8-inch headsets and front wheels with a 10 mm axle. The removable U-brake pivots allow use with a compatible U-brake or brakeless setup. Use only with compatible frames, headsets, stems and wheels.
Installation / use: Install the fork correctly and tighten all components and fasteners to the specified torques. Ensure correct installation of the headset, stem and front wheel axle. When using a brake, securely fasten the U-brake pivots and brake components. Before every ride, inspect the steerer tube, fork arms, dropouts, brake pivots and fasteners for secure fit, cracks, deformation or other damage.
Care and cleaning: Clean the fork regularly with water and a soft cloth. Do not use aggressive cleaning agents or pressure washers. Especially after crashes, hard landings or heavy impacts, carefully inspect the steerer tube, aluminium fork arms, connection areas and dropouts for damage.
Replacement due to wear: Replace the fork immediately if cracks, deformation, damaged dropouts, loose or damaged brake pivots or other safety-related defects are found. A damaged or structurally weakened fork may cause loss of control and serious injury.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login