BMX fork KHE RAVISHER LL 18 inch
£59.95*
Available, delivery time: 2-5 business days **
The KHE RAVISHER LL 18 inch BMX fork combines durable 1020 Hi-Ten steel, strong 3D dropouts and a 1.06 inch offset for precise steering and reliable performance in street, park and dirt riding.
KHE RAVISHER LL 18 Inch BMX Fork
The KHE RAVISHER LL 18 Inch BMX fork is a robust upgrade for 18\" BMX bikes, built from durable 1020 HiTen steel for high impact resistance. Its 3D dropouts are designed for 10 mm front axles, delivering a stable front end for street, park, and beginner race setups.
With a 27 mm offset, this BMX fork provides direct steering and controlled handling, ideal for precise lines and quick corrections. The fork is Affix Rotor Ready, prepared for the KHE Affix Rotor System, and weighs 1,080 g for a reliable balance of strength, durability, and responsive feel.
Produkthighlights
- 1020 HiTen steel, high durability
- 3D dropouts for 10 mm axles
- 27 mm offset, precise steering control
- Affix Rotor Ready for rotor setup
- 1,080 g, stable yet responsive
| Material: | HiTen steel |
|---|---|
| Size: | for 18" |
| Colour: | Anthracite |
| Weight: | 1080g |
| Dropouts: | 5mm wide, only for 10mm axles |
| Shaft diameter: | 1 1/8" |
| Shaft length: | 163mm |
| Leads: | 27mm |
Intended use: BMX fork for compatible 18-inch BMX bicycles for park, street and dirt use. Designed for front wheels with a 10 mm axle. AFFIX Rotor Ready for compatible KHE AFFIX rotor setups. Use only with compatible frames, headsets, stems and wheels.
Installation / use: Install the fork correctly and tighten all components and fasteners to the specified torques. Ensure correct installation of the headset, stem and front wheel axle. When using the AFFIX rotor system, use only compatible components. Before every ride, inspect the steerer tube, fork legs, 3D dropouts and fasteners for secure fit, cracks, deformation or other damage.
Care and cleaning: Clean the fork regularly with water and a soft cloth. Do not use aggressive cleaning agents or pressure washers. Especially after hard landings, crashes or heavy impacts, carefully inspect the steerer tube, welded areas and dropouts for damage.
Replacement due to wear: Replace the fork immediately if cracks, deformation, damaged dropouts, severe corrosion or other safety-related defects are found. A damaged or structurally weakened fork may cause loss of control and serious injury.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login